Barwood-Pilon has a full gamut of products designed to preserve and maintain the beauty of your prefinished hardwood floors. Ask us for the MIRAGE Maintenance Guide. It contains plenty of good advice and practical tips for you.
Maintenance accessories : 
  • MIRAGE Maintenance Kit includes:
    • 1 mop
    • 1 litre (34 oz liq.) spray bottle of cleaner
    • 2 terry cloth cover
  • 1 litre (34 oz liq.) MIRAGE spray cleaner
  • MIRAGE concentrated cleaner
  • MIRAGE replacement mop cover
  • MIRAGE Maintenance Guide
Quick process in only 3 easy steps :
MIRAGE recommends the following simple, effective way to care for your floor:
  1. Always vacuum or sweep the floor to remove all traces of dust or abrasive residues before cleaning.
  1. Spray lightly some MIRAGE cleaner on a section of the floor or directly on the terry cloth mop.
  1. Wipe the floor with the mop, lengthwise of the floor strips with a back-and-forth motion. Finish one section before starting another one.
Notes :
  1. Never use wax, oil-based detergent or any other household cleaners. These may dull or damage the finish, leaving a greasy film and making the floor slippery and more difficult to clean.

  2. A dirty mop cover may leave traces on the floor. Replace it with a clean one. The dirty cover can be machine-washed like any terry cloth towels.

    Helpful Tips :

  1. Regulary sweep or vacuum the floor to prevent sand or abrasive dust from accumulating and scratching the finish.

  2. Place doormats outside and rugs inside at every entrance of the house, again to prevent sand or abrasive dust from accumulating on the floor.

  3. Place a rug in front of the kitchen sink, kitchen working stations, and the dishwasher to protect the floor from dropped kitchen accessories and from water or oily detergent spills.

  4. Use adequate floor protection (felt pads) under all furniture and chairs legs, in order to ease their movements and to prevent scratching the floor.

  5. The relative humidity level in your home must be maintained at 45% (i.e. 40-50%) throughout the year.

    Hardwood is a living substance which reacts to changes of relative humidity. It absorbs or releases humidity according to seasons. Consequently, its dimension changes.

    In summer, when humidity is at its highest, it is absorbed by the wood which then expands. These variations can be minimized with proper ventilation, dehumidifying or heating. In winter, on the other hand, when the heating system is on, the relative humidity level in the house is much lower. It is then recommended to use a humidifier, in order to minimize extreme shrinkage effects.

  6. Keep "high heel" shoes in good condition. Damaged or worn high heels may expose a metal tip which will certainly damage your hardwood floor.

  7. Protect your floor against direct sunlight or any intense source of artificial lighting. Over time, intense light will discolor exposed surfaces. This phenomenon with wood surfaces is normal and natural. The lighter the color of the natural wood, the more apparent this phenomenon will be.

    Did you know :

  • That you can easily replace a damaged strip?
  • That you can restore the finish and lustre of a polyurethane coating?
  • That you can change the color of your floor?
* For additional information, please contact one of our salespersons or ask your questions via our email address info@barwoodpilon.com.


ORDERING PRODUCTS


Should you wish to order one of the products,
call toll free
1-800-368-1886   (Laval) or
1-800-363-2601   (city of St-Laurent).

If you prefer to use the internet, click the email address below :


Email: info@barwoodpilon.com